Metropole 6160 Silver - Two Bend Bay
Measuring your track

Please enter the measurements for your bay as accurately as possible as shown on the diagram above.

if you would like us to come out and measure locally (25m radius) please contact us. we are also happy to travel countrywide however charges may apply contact us for details.

Metropole 6160 Silver - Two Bend Bay

  • Cord operated system for domestic and contract applications
  • 6160M can be bent for bay windows etc
  • For medium to heavy weight curtains
  • Made to measure
  • Choice of 7 different finishes - anodised silver, black, white, steel grey, diva gold and wood effects; oak and mahogany
  • Accessorised with matching endsets and coordinated or matching brackets/bracket covers
  • A selection of finials are available
  • Easy fitting to wall with adjustable brackets
  • Suitable for use with Wave Standard and Wave XL curtain heading systems
  • Maximum profile length 6m (wood effect 5m)
Total width of track

Track width

measure from the point you wish the track to start to the point you wish it to finish .e.g on a straight track this would be from A-B whereas a 5 bend bay would be A-B-C-D-E-F-G.
Track is face fix (to wall) or top fix (to ceiling/pelmet board)

Track fixing type

some tracks and poles have specific top or face fix brackets tell us where your fixing your track ? if face fixing to a wall consider if you need to buy extension brackets available below
If top fixed, projection to fixing point (cm)

Top fixed projection

tip maybe your track is to be fixed to the ceiling and your curtains are full length and need to clear a window ledge we will need to know how far in from the point you measured (more than likely the wall) you wish us to space the track. this only applies to bay windows if your track is straight you can leave this blank.
Cord Drop (cm)

Cord Drop

As standard all tracks and poles will come with a 150cm cord if you wish this to be longer or shorter measure from the point you are fixing your track to the point you wish the cord to come down to.
Cord Weight

Cord Weight

Although not a must we recommend cord weights on all corded tracks as it makes a neater job and your cords easier to find behind your curtains.
Curtain Configuration

Curtain Configuration

Tell us how you wish your curtain to work ? maybe you have a standard pair hanging (stacking) either side drawing to the center or maybe you have a single curtain that hangs (stacks) on the left and pulls to the right etc.
These measurements are

Measurement type

Unless you tell us these are the actual track size measurements on all face fix tracks we will allow for the standard bracket projection if you tell us these are track size no allowances will be made and your track will be made exactly to the sizes you give us.
Measurement: a - b (cm)

Measurements

Please enter the measurements for your track as accurately as possible as shown on the diagram on the left.
Measurement: b - c (cm)

Measurements

Please enter the measurements for your track as accurately as possible as shown on the diagram on the left.
Measurement: c - d (cm)

Measurements

Please enter the measurements for your track as accurately as possible as shown on the diagram on the left.
Measurement: a - c (cm)

Measurements

Please enter the measurements for your track as accurately as possible as shown on the diagram on the left.
Measurement: a - d (cm)

Measurements

Please enter the measurements for your track as accurately as possible as shown on the diagram on the left.
Measurement: d - b (cm)

Measurements

Please enter the measurements for your track as accurately as possible as shown on the diagram on the left.
Angle: b (degrees)

Angles

We can make your tracks with either cross measurements (as in diagram to the left) or with angle measurements on each bend but we recommend you give us both ! This means we have a way of double checking your measurements. An easy to use downloadable protractor can be found in our measuring section .Remember all tracks are made bespoke to the measurements you provide so they must be as accurate as possible. Bespoke products cannot be returned please see our Terms & Conditions . You can also make an enquiry about our measuring service just contact us.
Angle: c (degrees)

Angles

We can make your tracks with either cross measurements (as in diagram to the left) or with angle measurements on each bend but we recommend you give us both ! This means we have a way of double checking your measurements. An easy to use downloadable protractor can be found in our measuring section .Remember all tracks are made bespoke to the measurements you provide so they must be as accurate as possible. Bespoke products cannot be returned please see our Terms & Conditions . You can also make an enquiry about our measuring service just contact us.

PLEASE NOTE: Unless extension brackets are ordered metropoles come with standard 5cm brackets (or 8cm on 50mm poles) on straights or adjustable 10cm on poles with bends.
Click here to order extension brackets
  • select qty
  • unit price
    £391.30
15% off all orders over £100
Click Here